• <optgroup id="xeehh"><em id="xeehh"><del id="xeehh"></del></em></optgroup>
  • <optgroup id="xeehh"></optgroup>
    <span id="xeehh"><sup id="xeehh"></sup></span><acronym id="xeehh"></acronym>

    首頁 產品中心 柴油車煙度計

    PRODUCTS CENTER
    柴油車煙度計
    HPC601便攜式不透光煙度計



    主要功能特點:

    便攜式一體化結構設計;
    采用分流式取樣技術、柴油機加速、減速和穩速時均可測量煙度;
    數據自動線性化處理,可顯示不透光度N、光吸收系數K和對應濾紙式煙度值SF;
    高亮度數碼顯示;
    采用“空氣幕”技術保護光學系統免受污染;
    檢測室自動恒溫控制,可防冷凝而影響測試精度;
    附自動時間顯示,可選配轉速測量和油溫測量;
    出現故障自動診斷顯示所在單元;
    配內置打印機或藍牙、RS232、模擬接口。
    符合ISO11614和GB3847-2018技術要求。


    主要技術參數:

    測量范圍            不透光度N:0~99.9%(相當煙度值0~10FSN)
    光吸收系數K:0~16.06m-1
    轉速:0-9990rpm     油溫: 0-150℃
    示值誤差            ≤±2%(測量值)
    穩 定 性            自動校零,量矩漂移≤±1%/4h
    重 復 性            重復誤差≤±1%
    分 辨 率            N為0.1%, K為0.01m-1 ,轉速為10rpm,油溫為0.1℃
    輸出方式           數字直讀顯示,可附打印機打印煙濃度(暗度)最大值,測試
    時間、日期等??筛浇涌谂c計算機聯網
    測量室溫度        70℃(自動恒溫),當溫度誤差≥±10%時,溫度及錯誤指示燈亮
    環境條件           溫度-5~50℃,相對濕度≤90%
    電      源            AC100-240V 50/60Hz 消耗功率150VA
    外形尺寸          (含支架)160mm(深)×400mm(寬)×480mm(高)
    重      量            約8kg

    Main Features:

    ◆Integrated Structural Design
    ◆Adopted a triage-type sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the smoke
    ◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-type smoke SF
    ◆High-brightness digital display;
    ◆Use of "air curtain" technology to protect the optical system from pollution
    ◆Automatic detection of room temperature control, anti-condensation can affect the testing accuracy
    ◆Automatically attached to the time display, and optional speed measurement and oil temperature measurement
    ◆Show where the failure of automatic diagnosis unit;
    ◆Equipped with built-in printer (or Bluetooth / RS232 interface)

    ◆In line with ISO11614 and GB3847-2005 technical requirements.

    Main technical parameters:

    Test ScopeNo light transmission N:0100% (equivalent to smoke value 0~10FSN)

    Light absorption coefficient K:016.06 m-1

    RPM09990rpm OIL TEMP: 0150℃

    Indication error: ≤±2% ( measured value)

    Stability:moment drift≤±1%/4H

    Repeatability ≤±1%

    Resolution: N:0.1%, K:0.01m-1 ,RPM:10rpm, OIL TEMP:0.1℃

    Output mode:digital direct reading, can be attached to the printer to print the smoke concentration ( darkness) maximum value, test time, date. Can interface with computer networking

    The measurement chamber temperature:

    70 ℃ (automatic), when the temperature error of ± 10%, temperature and error indicator light

    And-use temperature: -5~50°C, Relative humidity: 90%

    Power: AC100~240V 50/60Hz or DC12V, Power consumption: 150VA

    Dimensions ( including bracket) :160 ( L)×400(W)×480 (H)mm

    Weight: 8kg

    上一篇:暫無    下一篇: HPC606便攜式不透光煙度計

    一级a级毛片

  • <optgroup id="xeehh"><em id="xeehh"><del id="xeehh"></del></em></optgroup>
  • <optgroup id="xeehh"></optgroup>
    <span id="xeehh"><sup id="xeehh"></sup></span><acronym id="xeehh"></acronym>